How To Clean White Converse? The Right Way

white converse

We’re happy to say that you’ve come to the right place if you’re looking to learn how to clean white Converse. You will learn about some of the most incredible cleaning and refurbishing tips in this article today. These shoes do indeed have a lot of different uses. It doesn’t matter what you wear them with; you’ll still look great. They can, however, also easily become filthy. The tips listed below will be useful to you because of this. They’re quick, simple, and incredibly powerful. Now that you’re free to check them out without holding yourself back, it’s time for you to rock these shoes and steal the show for good.

Cleaning Your White Converse Shoes – Snapshot

  1. Shoes’ laces should be untied.
  2. Be sure to wet them by running them under cold water.
  3. Make a cleaning agent using one of the following methods, then use a brush to apply it all over.
  4. Rub the paste into the tongue, sole, and edges of the shoes thoroughly.
  5. You can either put them in the washing machine or rinse them with cold water.
  6. Instead of drying them in the dryer, hang them to dry.

6 Best Ways To Clean White Converse Shoes

The best and safest way to clean any type of Converse shoes are made by hand. You can hand-clean your white shoes by following these simple step-by-step instructions.

Method 1 – With Baking Soda And Vinegar

What You Will Need

  1. Vinegar
  2. Baking soda
  3. Brush for scrubbing
  4. Glass bowl
  5. Hot Water
  6. Old tooth brush or applicator brush

How To Use It

  1. Mix one part baking soda with two parts vinegar in a glass bowl.
  2. Include some warm water.
  3. Depending on your requirements, you can increase the amount.
  4. Apply the paste to the shoes and rub them for a few minutes with an old toothbrush.
  5. If necessary, carry out the steps again.
  6. Rinse it under water or put it in the washer.
  7. Hang them dry.

Method 2 – With Toothpaste

What You Will Need

  1. Toothpaste
  2. Old toothbrush

How To Use It

  1. Put toothpaste on all of your shoes’ scuffed areas.
  2. Use a paste rather than a gel, as well as any white or uncolored items.
  3. Give it about 15 minutes to absorb.
  4. If you want to wash the shoes, use cold water to rinse them.
  5. Repeat the process if necessary, then hang the items to dry.

Method 3 – With Hydrogen Peroxide And Baking Soda

What You Will Need

  1. Hydrogen peroxide
  2. Baking Soda
  3. Warm water
  4. Old Toothbrush
  5. Gloves

How To Use It

  1. Mix one tablespoon of baking soda with half a tablespoon each of hydrogen peroxide and warm water.
  2. Make it into a paste.
  3. Apply the paste liberally throughout the shoes or the troublesome areas using an old toothbrush.
  4. 30 minutes should pass without them.
  5. Put them in the washer or a sink of water to clean them.
  6. If you have gloves available, put them on.
white converse

Method 4 – With Bleach

What You Will Need

  1. Bleach
  2. Toothpaste
  3. Baking soda
  4. Tooth brush
  5. Lemon(optional)
  6. Warm water

How To Use It

  1. Consider using liquid bleach and ingesting 50 ml of the chemical.
  2. One tablespoon of baking soda and toothpaste should be combined.
  3. It will become a runny paste when you add some warm water.
  4. Apply this all over your shoes and let them soak for a few hours.
  5. You can machine wash or use cold water to clean your shoes.
  6. As an alternative, you could simply rub lemon on your shoes and sprinkle baking soda all over them because lemon has natural bleaching properties.
  7. But keep in mind that bleach might make your shoes scuffed and worn.

Method 5 – With Baking Soda, Laundry Detergent And Water

What You Will Need

  1. Baking Soda.
  2. Laundry Detergent.
  3. Water
  4. Old Toothbrush

How To Use It

  1. Mix laundry detergent and baking soda in an equal amount.
  2. For it to become a silky, runny paste, add a little water.
  3. Use this on the shoes’ entire surface. In this liquid, the lace could also be soaked.
  4. 30 minutes should pass after leaving.
  5. The shoes can either be washed in water or put in the washing machine.
  6. Hang them dry.

Method 6 – With Nail Polish Remover/acetone

What You Will Need

  1. Nail polish remover
  2. Acetone
  3. Cotton pads

How To Use It

  1. If possible, soak cotton swabs in acetone or another nail polish remover you have on hand.
  2. Over the areas that are damaged, rub it.
  3. Thoroughly wash the shoes.
  4. They should be washed in water with liquid or powdered soap.
  5. Place them in the washer, then hang them to dry.
  6. Although it may not be the most efficient approach, it is your best option in an emergency.

Converse white shoes are remarkably easy to clean. In your home, you already have everything you need to make them look brand-new and flawless. On the shelf in your kitchen, you’ll find everything from toothpaste to acetone, bleach, hydrogen peroxide, and baking soda. All you have to do to give your Converse shoes that flawless, spotless appearance is carefully follow the above instructions. Therefore, if you are worried about them getting dirty the next time you hesitate to wear them, just relax. You can retain the novelty of those conversations with the aid of this article.

How Can I Remove Stubborn Stains From My White Sneakers?

Whether your Converse sneakers are made of canvas or leather will determine the cleaning method you use. In either scenario, you probably already have what you need in your cabinets: either hydrogen peroxide or baking soda.

Use hydrogen peroxide and a soft brush to scrub canvas shoes. Apply baking soda to a wet brush and gently rub stains on leather. As the brush picks up the stain, rinse it, and add additional peroxide or baking soda as necessary. In order to completely rinse the area for both materials, use a clean, wet cloth. Allow to air dry after wiping with a dry cloth.

How Do I Keep The White On My Converse Converse?

Spray a water- and stain-repellent spray on your white sneakers before you put them on for the first time and after each cleaning to keep them cleaner for longer. Both leather and canvas shoes work well with Kiwi Sneaker Protector, according to the GH Cleaning Lab. To prevent stains from setting, immediately blot and spot-clean them with a solution of mild dish soap and water after a spill. When you have time for a more thorough cleaning in the future, this will make them simpler to remove.

In between cleanings, use an eraser sponge to remove scuffs and stains from the rubber trim, like Mr. Extra Strong Magic Eraser for Cleaning. Put a Shout Wipe & Go Instant Stain Remover in your purse to deal with stains while you’re out and about. Our GH Cleaning Lab’s go-to stain solution for clothing, shoes, and other items uses these individually wrapped, moisture-retaining products.

Frequently Asked Questions

Can you dry your Converse shoes in the dryer?

If you don’t need to use them right away, let them air dry. As much as possible, try to avoid using the dryer because there is a chance that the shoes will shrink and the heat will quickly ruin their shine.

Can you wash Converse in the washing machine?

Yes, as we just discussed, clean the shoes first using one of the methods listed above. Last, add the items to the washing machine, add a mild laundry detergent, and set the delicate setting. Make sure to take off the lace once more.

Lucky Wong

Learn More →