A dirty PS4 can soon become a dysfunctional PS4. Your PlayStation will run loudly and lag if dust and other debris get into the fan. We’re here to show you how to properly care for your PlayStation. This technique is for the original PS4, but we also have some advice for the PS4 Pro and Slim. We’ll demonstrate how to clean the PS4’s exterior, fans, and controllers. Your PS4’s appearance and performance should soon be completely new.

When to Clean a PS4

To keep dirt and dust from collecting on and inside your PlayStation 4, you should clean the outside of it once a month. A problem will arise if your PS4 is not shielded from dust.

Noiseful fans, excessive heat, and hardware failure are signs of a dust problem. Your console may benefit from a deeper internal clean if you’ve noticed this behavior.

The PlayStation Four original can lose its warranty if it is internally cleaned, which is the bad news. Therefore, only attempt this if your warranty has expired and you are willing to accept the risks, including a broken PlayStation. Keep on top of dust control, to reiterate our main piece of advice, to avoid landing in this situation.

What Do You Need for Cleaning a PS4

• A TR9 Torx security bit screwdriver. The PS4 uses T9 security screws. If you want the best results, use a T9 screwdriver rather than a T8, which might still work.
• a regular Phillips screwdriver.
• anything sharp, like a knife.
• a compressed air can.

For more efficient cleaning, you may also want to use these optional materials:

• Cotton balls or cotton swabs.
• A flashlight.
• To hold the screws, use a piece of tape or paper towel.
• A cleaning brush or old toothbrush.

The warranty, which is typically good for a year after purchase if you have an original model PS4, will become void if you open it.)

Steps to Clean a PS4

Step 1: Shut Down and Unplug Everything

Prior to beginning any cleaning, make sure your gaming console is off. You must completely shut down the device if the orange light is still on and indicates that it is in Rest Mode.

The Quick Menu will appear after you turn on your console and press and hold the PlayStation button on your controller. Navigate to Power > Turn PS4 Off. Unplug the power cable, HDMI cord, and anything else connected to your PS4 after waiting until all of the lights have gone out.

Bring your console to a place that has enough space for you to work on and is static-free. Remember you will be removing screws. Work on a safe surface as a result.

Step 2: Remove the Back Stickers and Screws

Three stickers can be seen next to the power cable port on the PS4 when it is turned on its side. To proceed, you must take them out.

The special warranty sticker on the middle screw is damaged when it is removed. The other two are a little thick, so you might need to put in a little more effort. Peel back one of the stickers’ corners using your knife or any other sharp object. While doing so, take care not to damage your computer.

The TR9 screwdriver should be used to remove the screws after the stickers have been taken off. They should be placed aside in a secure location to prevent loss.

Step 3: Take Off the Cover

This will not require you to use energy since you have already unscrewed the screws. The cover ought to easily remove. Pull the edges up just a little bit. Remove the cover-up with a simple tug.

Step 4: Remove the Power Supply

The power supply must next be taken out in order to access the heat sink and thoroughly clean your PS4. Five screws need to be taken out. As the back cover, three of them use TR9 security screws, while the other two use regular Phillips head screws.

Step 5: Blow the Dust Out of Your PS4

Finally, you have access to the fan and heat sink. Take the compressed air can and place the straw inside for more thorough cleaning. Spray a few blasts of air away from your PS4 first just in case it has some liquid on the tip.

After that, use the canned air to spray short bursts of air all over the PS4 to clean it. You can get rid of the dust by doing this. For hidden dust, look in the corners. In this step, the flashlight will be useful. Blow out the concealed dust. Any dust that the air cannot remove can also be removed with the aid of cotton swabs and cotton balls.

Important to Note:

• Never hold a can on its side. The liquid will be forced out, which could harm your PS4.
• Avoid blasting the fan with compressed air. Make sure there is a barrier in place to prevent the fan from spinning before you start blowing air.
• Only use compressed air in ventilated areas. Long-term inhalation of canned air is risky.
• A steady stream of air cools the can quickly, making it difficult for you to handle. Spray in short bursts instead.

Step 6: Reassemble the PS4

Once you are done with the process to clean your PS4 and are satisfied that everything is okay, you will need to put everything back to its position in reverse order. Once everything is back to its original position then you are set. You’ll get more use out of your PS4 if you clean it. For more assistance, click here.

Summary

Now, your PS4 ought to be operating more quickly and quietly. You will need to come to our repair facility to have your PS4 thoroughly cleaned in order to improve its functionality. Stick to this fundamental cleaning to prevent harming your system. Our video game console engineers will have you covered for the more thorough cleaning.

FAQs